MSK071E-0303-FN-M1-UG0-NNNN

Product Description

The MSK071E-0303-FN-M1-UG0-NNNN synchronous servomotor from Bosch Rexroth can be used in potentially explosive areas. The motor is supposed to be put to use only with the manufacturer’s drive controller. This product cannot be used on a single-phase or a three-phase network directly. The device does not support operation underwater. The unit needs proper and correct mounting, installing, transporting and storing to be done for safe and optimum operation. It depicts derated performance when operated outside the ambient operating temperature range. This motor service and repair can be done only by the manufacturer’s service team. The product must never be operated without establishing a proper grounding connection.

The device has a standard design. The unit does not have any holding brake. It causes the connected drive controller to move dangerously due to its faulty control. The motor should undergo an acceptance test whenever it is changed before the initial startup of the system. The product is not intended to be used in areas where explosive atmospheres occur for a long period. This device is UL Listed and CSA Certified. The unit has four pole pairs. Its installation can be done in both horizontal and vertical orientations. The motor features a one-year warranty period.

This product is fitted with protective covers and sleeves that have to be removed only just before assembly. The device features Class 3K4 climatic category for operation as per DIN EN 60721-3-3 specifications. The unit is equipped with an optical encoder system. It supports a maximum axial vibration load of 10m/s². The motor portrays IP 65 degree of protection for its output shaft as well as housing. The product is free of any harmful materials that have an adverse effect on the environment. The device depicts a black RAL 9005 varnish on its housing. This motor is shipped globally to any address of your choice.