MSK071E-0300-NN-S1-UP0-NNNN

Product Description

MSK071E-0300-NN-S1-UP0-NNNN is a servo motor. It is produced by <,Bosch Rexroth>>. The motor is a MSK series synchronous motor with an integrated singleturn encoder. A single-turn encoder is a rotary encoder that measures angular position within one revolution. Single-turn encoders are commonly used in industrial applications where precise position feedback is required within a single revolution. The encoder supports the Hiperface protocol. Its maximum current draw is 60 milliamps at 7 to 12 Volts. The servo motor has a shaft with keyway and seal. The motor shaft complies with DIN 6885-1 requirement. Seal on the shaft protects motor bearings from dust and moisture. It also prevents leakage of oil on the motor. The main power connector is on the housing. This connector is 240 degrees rotatable.

Bosch provides holding brakes as an option for MSK motors. However, the MSK071E-0300-NN-S1-UP0-NNNN does not include the holding brake. The continuous output torque at standstill for 60 K overtemperature is 23 Nm. The continuous output torque at standstill for 100 K overtemperature is 28 Nm. The continuous output current at standstill for 60 K overtemperature is 12.5 Amps. The continuous output current at standstill for 100 K overtemperature is 15.2 Amps. MSK071 motors are available with surface cooling and liquid cooling options. Operators can order motors with these cooling methods if required. Peak speed rating of the MSK071E-0300-NN-S1-UP0-NNNN motor is 4200 RPM. The recommended operating temperature is 0 to 40 degrees Celsius. Higher ambient temperatures lead to output derating. The optimal site elevation is 0 to 1000 meters. Higher elevations lead to output derating. Only trained professionals with relevant qualifications and training should operate and maintain the motor.