MSK071E-0200-NN-M1-UK0-NV02

Product Description

The MSK071E-0200-NN-M1-UK0-NV02 synchronous servomotor provided by Bosch Rexroth utilizes an encoder that supports indirect and absolute position recording within 4,096 mechanical rotations. The product features a thermal class of 155 according to EN 60034-1 specifications. The device needs the fitting of appropriate shock absorbers to be done if there are chances of strong vibrations during transport. The unit incorporates a unique type-plate. Its encoder and ball bearings get damaged if the shaft end has any impact. The motor shaft end and the fastening flange must have concentricity and position tolerance in accordance with DIN 42955 specifications.

This product is CE Certified and cUL Recognized. The device might have an unacceptably high shaft and bearing loads because of the change in angular position due to radial force when very stiff couplings are attached. The unit should have adequate lubrication and cleanliness for the sealing point to prevent the wearing out of its frictional seal. Its bearings tend to fail prematurely due to mechanical damage or increased wear because of differing loads. The motor housing varnish renders chemical resistance to mineral oils, water, sewage, seawater and diluted alkaline solutions or acids.

The device portrays IP 65 protection rating as far as the housing, connectors and output shaft are concerned if it is assembled and connected properly. The product can withstand a maximum 300m/s² radial shock load for 6ms. The unit features sinusoidal vibrations in stationary use. Its flange socket can be moved to the preferred output direction by turns of the plugged-in connector. This socket tends to get damaged mechanically when it is turned with tools like screwdrivers or pliers. Its connectors support connection and disconnection only in the de-energized and dry state. This motor is sent to its destination through a well-connected logistics network with its backup support tag for one year.