MSK071E-0200-NN-M1-UG1-NNNN

Product Description

The MSK071E-0200-NN-M1-UG1-NNNN synchronous servomotor comprises a 23Nm electrically releasing holding brake. The Bosch Rexroth motor uses a plain shaft with minimum requirements for the shaft hub connection. This product has a 30,000 operating hours lifespan for its bearings as per ISO 281 specifications if the load limits are not exceeded. The device depicts an admissible axial force of 60N. The unit must periodically be checked to ensure that its shaft sealing point is neither dry nor dirty. Its holding brake does not offer assurance of personnel safety. The motor houses an encoder with 128 signal periods and a system accuracy of +/-120 angular seconds.

The product has a rotatable flange socket that can be turned at an angle of 240° if an appropriate connector is attached. This device allows the fitting of an encoder connector that has a screwed end fitting only after the correct placement of its power connector on the thread of the connection housing. The unit must use only the manufacturer’s connection cables whenever possible because of their extreme resistance and load capability. Its power cable is connected to the flange socket. This product is checked for the accuracy and fit of its connection to the machine before the electrical connections are established.

The device uses washers with a 12mm diameter in compliance with DIN EN 28738 specifications for the flange assembly. The unit assembly has to be done in a clean and dust-free environment. Its operating personnel should be trained and qualified to activate and deactivate electric equipment and circuits as per the technical safety regulations. The motor requires the use of suitable tackles as well as protective clothing and equipment for its transportation. The product storage should be done between -20°C and 60°C. It is possible to deliver this MSK071E-0200-NN-M1-UG1-NNNN motor internationally along with its warranty period of one year.