MSK071D-0450-NN-M1-AG1-NNAN

Product Description

The MSK071D-0450-NN-M1-AG1-NNAN synchronous servomotor produced by Bosch Rexroth has an adjustable flange socket. This motor connection is to be established when it is not de-energized. The product has plug connections that must be disconnected by pulling only the plug and not the cable. This device features an ambient installation elevation of 1000m over sea level as per DIN EN 60034-1 specifications. The unit encounters vibrations in the form of sine-wave oscillations in stationary use. Its installation in vertical orientation can be done with the shaft facing either upward or downward. The cables used to connect the motor must not be loaded with torsion or tension.

This product has a shaft seal that is greased for life under normal ambient conditions. The device is cooled by natural convection. This unit has an axial force based on its average speed and installation position. Its bearings may fail prematurely because of reduced grease lifetime. The motor is fitted with a 23Nm holding brake with a voltage rating of 24V +/-10%. The product is CE Certified and cUL Recognized. The device realizes heat dissipation through natural radiation to the ambient air. The unit features 75% relative air humidity during transport. This MSK071D-0450-NN-M1-AG1-NNAN motor has one-year backup support.

The motor requires protection against direct insolation or sunlight during the storage period. The product check must be done after a storage period of one year to ensure that its electric contacts are free of corrosion. The device has the tendency of getting damaged if high voltage inspection tests are done repeatedly. This motor features its type designation both in the type plate and encoder memory. It’s possible to dispatch the synchronous motor to any address in the world irrespective of where you live.