MSK071D-0450-FN-S2-UG0-RNNN

Product Description

The MSK071D-0450-FN-S2-UG0-RNNN synchronous servomotor from Bosch Rexroth is designed for use in potentially explosive areas. The motor is used with a drive controller that controls and monitors its operation. The product must be handled only as intended. The device belongs to the MSK product group of such offerings. The unit does not support direct three-phase mains operation. It should be used only with the manufacturer-approved spare parts and accessories. This motor performs the application-specific functions only if the connected drive controller has been programmed before use. The product operation has to be done only by trained and qualified personnel.

The motor has a very hot surface during operation. The device can operate at a maximum temperature of 55°C during operation. The unit faces the danger of explosion because of the exalted tensile load of connection cables. Its connectors must be connected and disconnected only in its de-energized state. This product is meant to be grounded through a motor cable before it is put to use. The device has no holding brake. This unit is not approved for use in areas where an explosive atmosphere can occur over a long period. The MSK071D-0450-FN-S2-UG0-RNNN motor comes with a one-year warranty period.

The product has a type plate indicating its type designation and technical details. The device is intended to be marked accordingly before it is installed. The unit is UL Listed and CSA Certified. It has a single turn absolute encoder with an EnDat 2.1 interface. The motor has four pole pairs. This product comprises a standard shaft with a cylindrical shaft end according to DIN 748, Part 3 specifications. The device can get damaged to a great extent due to the penetration of liquids. The unit installation can be done both horizontally and vertically. This motor supports international shipping to any destination of your choice.