MSK071D-0450-FN-S1-UP0-NNNN

Product Description

The Bosch MSK071D-0450-FN-S1-UP0-NNNN is a synchronous servo motor. It is called a synchronous motor as its rotor speed is synchronized to the frequency of input current. It is called a servo motor as it is part of a feedback-based control system. A sensor on the motor, called an encoder, sends feedback to the drive controller. The feedback is comprised of information such as current motor speed and torque. The drive controller uses this information to modulate its output and control motor parameters such as speed and torque. Two cables connect the drive controller and the motor. One cable is a power cable and the other cable is a feedback cable. These cables connect to respective connectors on the motor housing. The two connectors on the MSK071D-0450-FN-S1-UP0-NNNN are 240-degree rotatable.

A total of six different types of encoders are available for MSK motors. The MSK071D-0450-FN-S1-UP0-NNNN features an optical singleturn encoder. This encoder supports the Hiperface protocol. The shaft on the motor includes a keyway and a shaft seal. The keyway prevents relative rotation and therefore facilitates effective torque transfer to the connected machine. The shaft seal protects motor bearings from dust and other environmental contaminants. Three different cooling methods are available for MSK motors including natural convection, surface cooling, and liquid cooling. The MSK071D-0450-FN-S1-UP0-NNNN cools via liquid cooling. It is designed for 0 to 40 degrees Celsius ambient temperature. Optional holding brakes are available for MSK motors. However the MSK071D-0450-FN-S1-UP0-NNNN does not include a holding brake. The motor housing design is standard. Other housing types are available that suit different customer requirements. Ingress protection rating of the MSK071D-0450-FN-S1-UP0-NNNN motor is IP65. The shipping weight of the motor 18 kilograms.