MSK071D-0300-NN-S1-UG2-NNNN

Product Description

The Bosch MSK071D-0300-NN-S1-UG2-NNNN is an industrial servo motor. It is typically deployed in conjunction with a drive controller. The drive controller provides electrical power and controls motor position, speed and torque. Feedback from the motor enables the controller to learn the operating values of motor position, speed and torque. This feedback is provided by a sensor on the motor that is known as an encoder. The MSK071D-0300-NN-S1-UG2-NNNN features a single turn optical encoder. This type of encoder provides feedback within a single rotation of the motor shaft. Multiturn encoders are also available for MSK motors. The motor encoder supports Hiperface and is rated for 128 signal periods. The feedback cable and power cable connect to 240-degree rotatable connectors on the motor housing. MSK motors support plain shaft and shafts with a keyway.

Both types of shafts are available with sealing rings. The shaft on the MSK071D-0300-NN-S1-UG2-NNNN motor is a plain shaft. MSK motors also support optional holding brakes. A holding brake is a safety device designed to prevent shaft rotation. The brake releases the shaft and allows it to rotate only after an electrical release signal is applied. The brake on the MSK071D-0300-NN-S1-UG2-NNNN motor is rated for 30 Nm holding torque. The motor has a standard housing and cools via natural convection. The recommended operating temperature is 0 to 40 degrees Celsius. Output of the motor derates linearly between 40 and 55 degrees Celsius. The maximum output derating due to high ambient temperatures is 20%. The recommended range of elevations is 0 to 1000 meters. Output of the motor derates non-linearly between 1000 and 3000 meters. The maximum output derating due to high altitudes is 35%.