Product Description
The Bosch Rexroth MSK071D-0300-NN-S1-UG0-NPNN is an industrial servo motor. It is used with a drive controller for high performance industrial applications. The motor has a special housing design that features foot attachment. Motor mounting through foot attachment requires the use of M10 size screws with a washer. The required bore diameter is 12 millimeters. Before attaching the motor to the machine, it must be aligned so that the center line of the motor shaft is aligned with the center line of the connecting shaft. Before attaching the motor by means of foot mounting, the specified distance from the center of the motor shaft to the lower edge of the foot in the respective motor dimension sheet should be observed. Compare this dimension with the connection dimension on the machine side. Other types of motor housing designs are available for order if required.
The MSK071D-0300-NN-S1-UG0-NPNN is a convection cooled motor. Motor features include integrated encoder, plain shaft and rotatable connectors. The encoder is an optical single turn encoder rated for 128 signal periods. The plain shaft includes a shaft seal. The connectors on the MSK071D-0300-NN-S1-UG0-NPNN can be rotated by 240 degrees. Optical holding brakes based on the electrical release principle are available for MSK071D motors. However, the MSK071D-0300-NN-S1-UG0-NPNN does not feature a holding brake. Maximum speed of the MSK071D-0300-NN-S1-UG0-NPNN motor is 3800 RPM. During operation the motor produces sound pressure that does not exceed 75 dB. Its approximate weight is 18 kilograms. The protection class of the MSK071D-0300-NN-S1-UG0-NPNN motor is IP65. Surface of the motor housing is painted matte black. To avoid installation and other types of wiring errors, only trained technical personnel should install the MSK071D-0300-NN-S1-UG0-NPNN motor.
Wake Industrial Warranty
