MSK071D-0300-FN-S2-UG0-RNNN

Product Description

Bosch Rexroth is the world's largest maker of goods for mechanical engineering. By providing everything from strong synchronous motors to energy-efficient drive controllers, this company sets the bar for reliability and customer service.

The MSK071D-0300-FN-S2-UG0-RNNN model must be used in combination with the accessories mentioned in the user manual and must not be located at an elevation more than 1000 meters above sea level. The MSK071D synchronous motor has a thermal time constant of 54 minutes and winding resistance of 1.26 ohms (20 degrees centigrade). The model is a company-developed synchronous motor capable of producing a constant torque of 20 Nm at 100 k and 17.5 Nm at 60 k. The ambient temperature of the motor should be between 0 and +40 degrees Celsius during operation and between -20 and +80 degrees Celsius during translocation. Due to the high torque density of this MSK071D synchronous motor, it is appropriate for a broad variety of applications. It is intended to comply with the IP 65 standard for protection and has a thermal class of 155. To secure the motors to the machine properly and firmly, Bosch Rexroth-specified screws and washers must be used. The motor incorporates a single-turn EnDat2.1 optical encoder and must be used in conjunction with the driving controller specified.

The model MSK071D-0300-FN-S2-UG0-RNNN generates noise levels of less than 75 decibels, which is regarded as acceptable considering the motor's maximum speed of 3800 revolutions per minute and peak torque of 66 Nm at a maximum current intake of 40.5 amps. The model weighs 18 kg and is equipped with a 240-degree rotating electrical plug and a torque-distribution-capable plain output shaft. It may be utilized as a primary rotary drive or as a stand-alone servo drive system. Wake industrial stocks this motor (MSK071D-0300-FN-S2-UG0-RNNN) and can deliver it to a particular location within a defined time frame.