MSK071C-0300-NN-S1-UP0-NNNN

Product Description

Bosch Rexroth is the most trusted brand in the mechanical and electrical engineering business. This business sets the benchmark for reliability and customer service, providing everything from reliable synchronous motors to cutting-edge drive controllers.

The MSK071C-0300-NN-S1-UP0-NNNN model has a shaft with keyways and a sealing ring to ensure a tight seal, as well as a rotational electrical plug that rotates 240 degrees. This model is certified to IP65 and has a 155-insulation class. In comparison to other motors, the MSK071C synchronous motor offers slightly higher continuous and maximum torque values of 44 Nm and 18 Nm, respectively, which makes it appropriate for applications needing moderately high torque values and a high number of rotations per minute. This synchronous motor is part of the IndraDyn S servomotor family, which is utilized in a number of automated applications. The motor has a wide power spectrum, weighs 13.9 kilos, and can run at a maximum speed of 5000 revolutions per minute. This MSK071C synchronous motor must be handled carefully and used within a temperature range of 0 to 40 degrees Celsius, as specified in the user manual. If it is not used properly, personal harm may occur. At 20 degrees Celsius, the motor's voltage and torque constants are 110.5 V/1000min^-1 and 1.80 Nm/A, respectively.

The model MSK071C-0300-NN-S1-UP0-NNNN has a moment of inertia of 0.00173 kgm2 and is equipped with a temperature monitoring sensor to avoid overheating. The optical encoder model enables location tracking. It has a single-turn hiperface with 128 distinct increments. Natural convection transfers heat from the housing to the outside, which has a thermal time constant of 15 minutes. For four pole pairs, this motor has a winding inductance of 10.900 mH. At 100 degrees Celsius, the synchronous motor (MSK071C-0300-NN-S1-UP0-NNNN) generates a constant torque of 14 Nm and uses a continuous current of 8.5 A.