MSK071C-0300-NN-M1-AP0-NNAN

Product Description

The MSK071C-0300-NN-M1-AP0-NNAN synchronous servomotor from Bosch Rexroth is designed to support operation in potentially explosive areas. This motor is intended to be operated with only the manufacturer’s drive controller. The product has an optical encoder system and an output shaft. The device belongs to the MSK product group of such offerings. The unit must be utilized properly and as intended to avoid the possibility of property damage and personnel injury. The drive controller associated with the servomotor should be programmed before its startup for the motor to perform the application-specific function.

The motor supports operation in both horizontal and vertical orientations. This product is designed to be utilized only with the manufacturer-approved spare parts and accessories. The device does not have any holding brake. The unit has to be disconnected from electric power and secured against turning ON again when it is being cleaned or during maintenance and repair work. It can take up to 140 minutes for the cooling action after the motor has been switched OFF. The product handling should be done using suitable tools and lifting equipment in the correct manner. This MSK071C-0300-NN-M1-AP0-NNAN synchronous motor has a one-year warranty period.

The product incorporates a keyway shaft that is designed as per DIN 6885-1 specifications and has a shaft sealing ring. This device comes equipped with an inlet and an outlet for the flushing action. The unit encompasses a type plate that portrays its type designation and technical details that can be useful at times of service. Its tensile loading limit must not be exceeded through the cables that are connected using connectors. The motor may explode if the tensile loading limit is beyond the permitted limit. This product is shipped in custom military-grade packaging to avoid damage during transit.