MSK071C-0200-NN-S1-UG2-NNNN

Product Description

Rexroth Indramat is committed to the development of high-quality equipment via the application of integrated system technology. There is a wide range of equipment available, including synchronous motors, primary filters, and electronic controllers.

The MSK071C-0200-NN-S1-UG2-NNNN model generates a constant current of 18 Nm and uses a continuous current of 7.8 A at a stationary surface. Due to the premise that excessive oscillations have been demonstrated to diminish motor efficiency, they should be utilized with caution to ensure system lifespan and within the 0 to +40 degree Celsius operating temperature range. The holding brake on the MSK071C synchronous motor weighs 1.9 kg and delivers a holding torque of 30 Nm at a current consumption of 0.94 A. The torque constant of the motor is 2.50 Nm/A, and the winding resistance is 3.10 ohms; it should be used only with the accessories listed in the user manual. The motor has a maximum rotational speed of 3500 revolutions per minute and a maximum current intake of 23.4 amps. The MSK071C synchronous motor weighs 16.2 kilograms and has a torque rating of 44 Nm. A professional technician must install and operate it. The device incorporates a singleturn hiperface encoder with absolute encoder properties.

The model MSK071C-0200-NN-S1-UG2-NNNN has four polar pairs and a thermal time constant of 15 minutes, which corresponds to the time necessary for the motor to naturally cool down. The voltage constant of this model is 155.5 V/1000min^-1, and it has a 240-degree rotating electrical plug. The motor's output shaft is plain and fitted with a sealing ring to ensure the shaft's safety. The company is dedicated to providing exceptional goods and going above and beyond to ensure 100% client satisfaction. Buy this motor (MSK071C-0200-NN-S1-UG2-NNNN) from Wake industrial and get a replacement warranty along with it.