Product Description
The MSK071C-0200-NN-M1-UG1-NSNN synchronous servomotor from Bosch Rexroth works with the manufacturer’s digital drive controller. This motor and digital controller combination are used in general automation technology systems. The product is a good choice for use in potentially explosive areas. The device belongs to the MSK product group of offerings. The unit is compliant with the ATEX design. It may cause property damage, personnel injury or both if it is used inappropriately. This motor should not be used with drive controllers from other manufacturers. The product is intended to be operated only by trained and qualified personnel. The device is to be used only for industrial applications.
The motor has a very hot housing surface during operation. This product may cause dangerous drive controller movements due to its faulty control. The device comes with an additional grounding connection with a minimum 4mm2 cross-section. The unit is capable of operating at a maximum temperature of 55°C with derated data. It should be ensured that the tensile loading limit is not exceeded through cables that are connected via connectors. The motor depicts a discharge current flow over its conductive housing parts if the grounding conductors are not connected. The device has a one-year warranty period.
The product encompasses a holding brake that is used only in standstill mode to perform a drive-internal brake check. This device poses the risk of explosion hazards when it is overloaded. The unit installation should be carried out only after its type plate has been marked accordingly for operation in the atmosphere with combustible dust or gas. It is UL Listed and CSA Certified. This motor comes with a continuous torque of 12Nm and a continuous current of 5.2A in standstill mode at 60K. The product portrays a maximum allowed axial shock load of 100m/s2 for 11ms. This MSK071C-0200-NN-M1-UG1-NSNN motor can be shipped globally to the desired destination.
Wake Industrial Warranty
