MSK070E-0300-NN-S2-UG1-RNNN

Product Description

The MSK070E-0300-NN-S2-UG1-RNNN synchronous servomotor from Bosch Rexroth is used for general automation technology-related applications. This motor is integrated with an optical encoder system, an output shaft and a holding brake. The product must be used with the manufacturer’s drive controller. The device belongs to the MSK product group of such offerings. The unit is capable of performing the application-specific functions only if the drive controller is programmed prior to startup. It should never be put into operation for applications other than those intended. The servomotor tends to have a very hot housing during its operation. The product can trigger dangerous drive controller movements due to faulty control.

The device is supposed to be used only as intended to avoid property damage or personnel injury. The unit encompasses a grounding connection that must be established through a motor cable before turning the power ON. It has to be serviced and/or repaired only by the manufacturer’s service team. This motor is designed to support operation between 0°C and 40°C. The housing of the product must be protected against corrosion. The device is capable of using its holding brake only when it is in standstill mode during normal operation. This servomotor comes with a one-year warranty period.

The product is meant to be subject to an acceptance test every time it is changed or before the initial system startup. The device is UL Listed and CSA Certified. The unit has six pole pairs. Its encoder has one distinguishable revolution and 2,048 signal periods. The motor is subject to radial and axial forces on its shaft and bearings when it is in use. The product supports a maximum axial force of 60N. The device must not have any liquid accumulation at the output shaft. The unit supports a flange mounting design. This motor can be shipped anywhere across the world.