Product Description
The Bosch MSK070E-0300-NN-M3-AG0-NNAN is an industrial servo motor. A servo motor is a motor that is part of a servo system that includes a servo controller. A sensor on the motor measures parameters such as speed and torque and send this information to the controller. One of the functions of the controller is to keep motor parameters in line with programmed parameter values. The controller does this by comparing feedback from the motor with programmed parameter values. Any difference between the feedback and programmed parameter values leads to modification of the controller output. This is done to bring motor parameters in line with desired parameter values. The combination of a servo motor and servo controller forms a closed loop control system. This feedback is fed to the controller as long the as system is in operation.
According to the type code, the motor frame size is 070 and the frame length is E. A type plate attached to the motor includes relevant information including the type code and input / output ratings. This type plate should be checked at delivery to ensure that the correct equipment is received. The information on the type plate also proves helpful when replacement parts have to be ordered. The MSK070E-0300-NN-M3-AG0-NNAN includes a capacitive encoder with Hiperface protocol support. The encoder is rated for 16 signal periods. Both connectors on the MSK070E-0300-NN-M3-AG0-NNAN are 240-degree rotatable. The motor shaft is plain and includes a sealing ring. The MSK070E-0300-NN-M3-AG0-NNAN is supplied without a holding brake. The maximum motor speed is 5300 RPM. The MSK070E-0300-NN-M3-AG0-NNAN is designed for cooing through natural convection. The recommended temperature range for motor operation is 0 to 40 degrees Celsius.
Wake Industrial Warranty
