MSK070E-0150-NN-M1-UG0-NNNN

Product Description

Bosch sets the bar for dependability and customer service, with products ranging from high-efficiency synchronous motors to cutting-edge drive controllers.

The MSK070E-0150-NN-M1-UG0-NNNN model must be used within a temperature range of 0 to 40 degrees Celsius and handled according to the user handbook. If it is not used as intended, personal harm incidents may occur. This synchronous motor belongs to the IndraDyn S servomotor series, which has an IP65 protection rating and a 155-insulation class. The MSK070E synchronous motor is small and light, weighing just 16.2 kilograms and operating at a maximum speed of 2200 revolutions per minute. The model uses natural convection to remove heat from the housing and possesses a thermal time constant of 32 minutes. The device has a 240-degree rotating plug and a simple shaft with a sealing ring to ensure a tight seal. This model has a sound level of less than 75 decibels and a moment of inertia of 0.00458 kilograms per square meter. At 20 degrees Celsius, the MSK070E motor voltage and torque constants are 242.4 V/1000min^-1 and 3.94 Nm/A, correspondingly. The winding inductivity of this motor is 24.500 mH, and the winding resistance is 3.10 ohms. To obtain the maximum results from the model, it should be installed and operated by a skilled person.

The MSK070E-0150-NN-M1-UG0-NNNN model possesses a marginally higher maximum torque rating of 70 Nm, respectively, as compared to other motors, making it appropriate for scenarios needing fairly high torque values and a small footprint. A temperature tracking sensor is included in the device to prevent overheating. With a total of 2048 distinct increments, the model uses a multiturn EnDat2.1 architecture. Wake industrial provides a replacement warranty with the purchase of this product (MSK070E-0150-NN-M1-UG0-NNNN).