MSK070D-0450-NN-M2-UP1-RSNN

Product Description

The MSK070D-0450-NN-M2-UP1-RSNN is a synchronous motor. It is part of the MSK product family from Bosch Rexroth. The motor, in combination with a compatible controller, is suited to applications such as machine tools, robotics, printing machines, and metal-forming machines. Bosch has provided several guidelines regarding its motors in the product documentation. These guidelines are as follows: the motor hardware must not be modified and any software installed on it must not be decompiled, the motors should be installed according to instructions provided in the documentation and any damaged motor must not be installed or put into operation. Bosch does not provide any warranty or accept any liability for damages resulting from improper use of its industrial products. The controller connected to the MSK070D-0450-NN-M2-UP1-RSNN should be programmed before the system is commissioned and powered up.

The MSK070D-0450-NN-M2-UP1-RSNN is a feature rich motor. some of the integrated features on the motor include a holding brake, shaft with key, rotatable connectors, integrated encoder and an extended design with increased concentricity and run out. The connectors on the MSK070D-0450-NN-M2-UP1-RSNN can be rotated 240 degrees in either direction. The main shaft also includes a sealing ring. The motor encoder is an optical multiturn encoder rated for 2400 signal periods. Holding torque of the brake is 23 Nm and its rated voltage is 24 Volts DC. The MSK070D-0450-NN-M2-UP1-RSNN is designed for convection cooling. If required, forced air cooling can also be used to increase the rate of heat dissipation. Peak speed of the MSK070D-0450-NN-M2-UP1-RSNN motor is 6000 RPM. The total weight of the motor, including the holding brake is 15.6 kilograms. The motor housing is IP65 rated which allows motor use in adverse environmental conditions.