MSK070D-0450-NN-M2-UP1-RNNN

Product Description

The Bosch MSK070D-0450-NN-M2-UP1-RNNN is a MSK series industrial servo motor. It is usually deployed in combination with a drive controller. The motor comes with an integrated optical encoder that measures motor speed, position and torque. This information is shared with the controller, which enables the controller to control these motor parameters. The encoder on the MSK070D-0450-NN-M2-UP1-RNNN is a multiturn encoder that provides motor parameter measurement after more than a single rotation of the motor shaft. Single-turn encoders for MSK motors are also available. The feedback from the motor encoder is sent via a feedback cable that terminates on a designated connector on the motor. The controller also provides power via a power cable that terminates on a dedicated connector on the motor. Both of these connectors on the motor are 240 degree rotatable.

As per the product type code, the frame size for the MSK070D-0450-NN-M2-UP1-RNNN motor is 070 and the frame length is D. The motor housing is designed with increased concentricity and run out. The motor housing is completely sealed and the cable connectors are also completely sealed. The shaft on the motor includes a shaft seal. All these factors contribute to the IP65 rating for the motor. This rating allow use of the MSK070D-0450-NN-M2-UP1-RNNN under adverse environmental conditions. The shaft on the MSK070D-0450-NN-M2-UP1-RNNN motor includes a key as per DIN 6885-1. The MSK070D-0450-NN-M2-UP1-RNNN motor also features a 23 Nm rated electrically-releasing holding brake. The function of the brake is to prevent shaft rotation until a release signal is applied. The MSK070D-0450-NN-M2-UP1-RNNN is designed for natural convection cooling and required 0 to 40 degrees Celsius for optimal performance. The motor output derates at higher temperatures. Surface of the motor is painted black.