MSK070D-0300-NN-M1-UG0-NSNN

Product Description

The MSK070D-0300-NN-M1-UG0-NSNN is a Bosch Rexroth servo motor. It is available with a standard and extended design according to device group II EN 60079. MSK motors with other designs are available and can be ordered depending on customer requirements. As pre the series type code, the frame size of the MSK070D-0300-NN-M1-UG0-NSNN motor is 070, the frame length code is D and the code for the motor winding is 0300. The motor comes with a plain shaft that has a diameter of 32 millimeters. About 58 millimeters of the shaft are outside the motor housing. The centering diameter of the motor is 130 millimeters. The MSK070D-0300-NN-M1-UG0-NSNN is a flange mounted device and the size of the flange is 140 millimeters. The radius of each mounting hole on the flange is 12 millimeters.

The length of the MSK070D-0300-NN-M1-UG0-NSNN motor is 268 millimeters and its shipping weight is approximately 14 kilograms. Bosch does provide holding brakes as an option for MSK motors. However, the MSK070D-0300-NN-M1-UG0-NSNN does not feature a holding brake. An integrated optical multiturn encoder on the motor enables motor feedback. Other types of encoders are available for MSK motors and can be ordered if required. The motor gets power from a connected drive controller. The power connector on the motor is 240-degree rotatable. The motor also sends feedback to the controller. The feedback connector on the MSK070D-0300-NN-M1- UG0-NSNN is also 240-degree rotatable. The MSK070D-0300-NN-M1-UG0-NSNN motor cools via natural convection. The recommended ambient temperature range for motor operation is 0 to 40 degrees Celsius. A sealed housing and sealed connectors contribute to IP65 protection rating for the motor. This rating allows motor use in adverse environmental conditions.