✓ In-Stock!

Wake Industrial LLC is not an authorized distributor of this product.

MSK061C-0200-NN-M2-UG1-RNNN

  • Rated 4.3 (10 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911335963
    In-Stock, Ships 3-5 Days

Current response time:

6 Minutes 58 Seconds

The MSK061C-0200-NN-M2-UG1-RNNN is manufactured by Rexroth Indramat Bosch as part of the MSK Servo Motor Series. It features a continuous torque of 9.0 Nm and a continuous current of 3.6 A. It also displays a maximum torque of 12.0 Nmand a maximum current of 14.4 A and a winding inductive of 36,500 mH

Preparing your secure checkout page...

Warranty
1-year-warranty Wake Industrial Warranty
Shipping
DHL Logo FedEx Logo
UPS Logo Freight Logo
DHL Logo FedEx Logo UPS Logo Freight Logo
Payment
Visa Logo AmEx Logo
Mastercard Logo Wire transfer Logo
Visa Logo AmEx Logo Mastercard Logo Wire transfer Logo
To Speak to a sales representative for pricing and lead time:

Product Description

The Bosch Rexroth MSK061C-0200-NN-M2-UG1-RNNN synchronous servomotor is cooled by natural convection. This motor can be installed either horizontally or vertically. The product must not have any fluid accumulation at the output shaft when it is installed in the vertical orientation with the shaft facing upward. The device may get damaged due to the penetration of such fluid into it. The unit encompasses a standard black RAL 9005 paint for its housing. It must not be equipped with an additional varnish as this can adversely affect the surface characteristics such as electrostatic charging and insulation resistance. The motor comes with a standard plain shaft that renders a very quiet running action.

The product incorporates a multi-turn absolute optical encoder with a Hiperface interface and 128 signal periods. This encoder has a power supply voltage ranging between 3.6V and 14V and a maximum speed of 12,000min-1. The motor also features an electrically releasing holding brake with 10Nm holding torque. The device features a thermal class of 155 as per EN 60034-1 specifications. The unit is equipped with an isolation system featuring a high dielectric load. It should never have salt mist on its surface. This MSK061C-0200-NN-M2-UG1-RNNN motor has a year’s Wake Industrial warranty and is transported in custom military-grade packaging.

The servomotor shaft and bearings are prone to radial as well as axial forces during operation. The motor portrays a maximum allowed axial force of 40N. The device houses a bearing with a lifespan of 30,000 operating hours according to ISO 281 specifications. The unit supports the installation of gearboxes with oilproof and closed lubrication systems only. Its fixed bearing is located on the B side of the motor. The holding brake in this motor is susceptible to damage if it is activated repeatedly when the drive is rotating. This product comes with protective covers as well as sleeves on it that are to be removed only just before assembly.

  • MSK061C0200NNM2UG1RNNN
  • MSK061C 0200 NN M2 UG1 RNNN
  • MSK-061C-0200-NN-M2-UG1-RNNN
  • MSK61C-0200-NN-M2-UG1-RNNN

MSK061C-0200-NN-M2-UG1-RNNN Technical Specifications

Continuous Current at Standstill 100 K: 3.6 A
Continuous Torque at Standstill 100 K: 9.0 Nm
Maximum Current: 14.4 A
Maximum Torque: 12.0 Nm
Winding Inductivity: 36,500 mH
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo