MSK061C-0200-NN-M1-UG1-NNNN

Product Description

The Bosch MSK061C-0200-NN-M1-UG1-NNNN is a servo motor with standard housing design. The motor housing is completely enclosed. The connectors for power and feedback are also sealed. The plain shaft is also fitted with a sealing ring. All these factors contribute to the IP65 protection category of the motor. This protection category indicates that the motor housing is totally protected against dust ingress. The motor housing is also protected against ingress of liquids from low-pressure jets that may be directed at the motor from any direction. The MSK061C-0200-NN-M1-UG1-NNNN includes an integrated electrically releasing holding brake. The brake specifications include 10 Nm holding torque, 24 Volts rated voltage, 0.96 Amps rated current, 25 milliseconds maximum connection time and 40 milliseconds maximum disconnection time. The holding brake prevents shaft rotation from startup till application of an electrical release signal.

The MSK061C-0200-NN-M1-UG1-NNNN motor dissipates heat generated during operation through natural convection. This means that smooth flow of air around the motor body is essential. The recommended ambient temperature range is 0 to 40 degrees Celsius. Operation of the MSK061C-0200-NN-M1-UG1-NNNN outside this range leads to output derating and can also lead to motor malfunction. The maximum rate of change of ambient temperature should be less than 0.5 degrees Celsius per minute. Furthermore the maximum setup height for the MSK061C-0200-NN-M1-UG1-NNNN is 1000 meters. The relative humidity should be maintained between 5 and 95%. The integrated encoder on the MSK061C-0200-NN-M1-UG1-NNNN is a multiturn absolute encoder rated for 128 signal periods. The power connector and feedback connector are 240-degree rotatable. The motor is maintenance free as a result of the brushless design and use of bearing that are lubricated for the motor operating life span.