MSK061B-0300-NN-M1-UP0-NNNN

Product Description

The Bosch MSK061B-0300-NN-M1-UP0-NNNN is a MSK series digital servo motor. It is used in combination with drive controllers for industrial applications such as packaging machines, printing machines, robotics and machine tools. The drive controller provides power to the motor and also controls motor parameters such as torque and speed. The drive controller should be configured prior to motor commissioning. Controlling and monitoring of the motor may require the connection of additional sensors and actuators. MSK motors should only be used with accessories that are specified in the product documentation. Components that are not explicitly mentioned should neither be attached nor connected. Operation of the MSK061B-0300-NN-M1-UP0-NNNN motor is only allowed in the specified configurations and combinations of the component and with the software and firmware that are specified in the corresponding functional description.

The MSK061B-0300-NN-M1-UP0-NNNN motor features 240-degree rotatable power and feedback connectors, a shaft with keyway as per DIN 688501 and sealing ring, standard housing and a multiturn absolute optical encoder. The MSK061B-0300-NN-M1-UP0-NNNN motor does not include a holding brake. The housing of the MSK061B-0300-NN-M1-UP0-NNNN is suited to cooling via natural convection. The stated motor performance data is valid for 0 to 40 degrees Celsius ambient temperature and 0 to 1000 meters altitude. The motor performance data reduces if the specified ambient limits are exceeded. The environmental relative humidity should be kept between 5 and 95%. The temperature rate of change should not be more than 0.5 degrees Celsius per minute. The motor protection category according to EN 600345 is IP65. This implies total protection against dust ingress. The motor housing is also safe from low-pressure water jets. Only qualified personnel should operate and service the MSK061B-0300-NN-M1-UP0-NNNN motor.