MSK060C-0600-NN-M3-UG1-NNNN

Product Description

The MSK060C-0600-NN-M3-UG1-NNNN synchronous servomotor manufactured by Bosch Rexroth comprises a 240° rotatable connector. This motor portrays high torque density. The product tends to cause a voltage deviation if a fault takes place during operation. The fault must be detected and eliminated immediately. The holding brake must be used only when the motor is in standstill mode and when a drive-internal brake check is performed. The device is capable of performing the application-specific function only if its drive controller is programmed before the startup. The unit should not be used in areas where an explosive atmosphere occurs for a prolonged period.

The motor is likely to have a high temperature when it is overloaded. The product depicts a thermal class of 155 as per EN 60034-1 specifications. The device depicts a 0.0008kgm² moment of inertia for its rotor. This unit has a size of 116 x 226 x 50mm. It incorporates a multiturn absolute Hiperface encoder with 4,096 distinguishable revolutions. This motor has RAL 9005 black varnish for its housing. The product houses a plain shaft with a shaft sealing ring. The speed and position of the motor are controlled by the related drive controller with the help of the inbuilt encoder. This MSK060C-0600-NN-M3-UG1-NNNN motor is available with one-year backup support and can be delivered to any destination of your choice.

The standard version motor features a change in its thermal coupling when it is fitted with transmissions. The product must be connected only in the de-energized state. The device is supposed to be connected only with the manufacturer’s cables. It exhibits derated performance when it is utilized outside the highlighted ambient operating conditions. The unit comes with a Class 3K4 climatic category during operation in accordance with DIN EN 60721-3-3 specifications. This product experiences vibrations in the form of sinewave oscillations when it is stationary.