MSK060C-0600-NN-M3-UG0-NNNN

Product Description

Bosch Rexroth is a renowned brand that continues to offer motion control products of unmatched quality and durability. Equipped with modern facilities and the increased use of technology in its operations ensures that the automation aftermarket accessories are innovative, ultra-efficient, cost-effective and perform optimally. Also, the skilled human resources who devote countless hours in research, design, manufacture and continuous testing further enhance the quality of these components. Be it supply modules, mains filters, synchronous motors, low inertia motors, drive controllers, permanent magnetic motors or even power cables, Bosch Rexroth is the brand. With these accessories, you can configure to your particular needs and you can also accommodate an array of applications.

Bosch Rexroth’s MSK060C-0600-NN-M3-UG0-NNNN synchronous motor can be cooled through natural convection or surface cooling. With surface cooling and the motor on a standstill, the continuous current value is absent while the continuous torque stands at 10.4Nm. At 100K, the continuous current at standstill is 10.5 Nm while the continuous torque at standstill stands at 8.8 Nm. In 60K overtemperature, the continuous torque is estimated to be 8 Nm while the continuous current is 9.5A. The peak torque of this unit is 24Nm and the maximum current is estimated to be 38 Amps.

The MSK060C-0600-NN-M3-UG0-NNNN motor has a leakage capacitance of the component of 2.2nF, a winding inductivity of 8.6 mH and requires 4 poles to operate. Its degree of protection is IP65 and expected maximum speed is 6000 min-1. When operating this motor, the ambient temperature is 0 to 40⁰C and without holding brakes, the rotor moment of inertia is estimated to be 0.0008KgXm². The constant voltage stands at 57V/min-1, the torque constant is estimated to be 0.93 Nm/A, and the winding resistance stands at 0.8 Ohms.