MSK060C-0300-NN-M2-UP1-RNNN

Product Description

The Bosch MSK060C-0300-NN-M2-UP1-RNNN is a synchronous motor that belongs to the MSK product line. The shaft speed of a synchronous motor is synchronized to the frequency of the input current. The motor is used in combination with a compatible drive controller that controls motor parameters such as speed and torque. The motor is designed with increased concentricity and run-out according to DIN 42955. The housing of the MSK060C-0300-NN-M2-UP1-RNNN is IP65 rated. This protection rating indicates total protection against dust. The housing is also safe from low-pressure water jets. The seal on the shaft is one the features that contributes to this excellent protection rating. The shaft seal prevents leakage of motor oil and also protects motor bearings against dust and moisture that may be present in the operating environment. The shaft on the motor also includes a keyway as per DIN 6885-1.

An optical encoder is provided on the MSK060C-0300-NN-M2-UP1-RNNN motor. This device measures motor parameters such as speed and position, which are then sent to the drive controller. Feedback from the motor is one of the main features of a closed loop control system that allows precise control of motor operating parameters. An electrically released holding brake rated for 10 Nm holding torque is also provided on the motor. Centering diameter of the MSK060C-0300-NN-M2-UP1-RNNN is 95 millimeters. The diameter of the main motor shaft is 19 millimeters. The MSK060C-0300-NN-M2-UP1-RNNN mounts through four holes on the flange. The size of the motor flange is 116 millimeters and the diameter of each of the mounting holes is 9 millimeters. The MSK060C-0300-NN-M2-UP1-RNNN is designed for convection cooling and 0 to 40 degrees Celsius ambient temperature. Only qualified professionals should operate the MSK060C-0300-NN-M2-UP1-RNNN motor.