MSK060B-0600-NN-S1-UP1-NNNN

Product Description

The MSK060B-0600-NN-S1-UP1-NNNN synchronous servomotor manufactured by Bosch Rexroth tends to get damaged due to the intrusion of liquid. The motor has a holding brake that works on the electrically releasing principle. The device must be commissioned and maintained only in non-explosive environments. This unit features a length code of B. It is meant to be operated in its original state without any constructional or hardware modification. This motor should be installed as per the regulations specified in the documentation. The drive controller that is connected with the product has to be programmed before the startup so that the motor performs the application-specific functions.

The product is intended to be used only with spare parts and accessories approved by the manufacturer. This device must never be operated underwater. It features a Class 3K4 climatic category for permanent use of the motor. The unit is associated with a low relative air humidity of 5% in compliance with DIN EN 60721-3-3 specifications. It should be properly and correctly stored, transported, mounted and installed for safe and optimum operation. The associated drive tends to depict dangerous movements due to faulty motor control. The motor has to be grounded by means of a motor cable. The connectors of the product have to be tightened or locked securely during operation.

The motor tends to pose a risk of explosion hazards when it is overloaded. The product does not have leak-proof housing because its gaskets tend to deteriorate over time. The device encompasses a winding code of 600. The unit utilizes a single turn hiperface optical encoder with 128 signal periods. Its holding brake has a voltage supply of 24V +/-10%. This holding brake must be used only when the motor is in standstill mode and to perform a drive-internal brake check. This motor has a one-year warranty backup and is eligible for international shipping.