MSK060B-0600-NN-M2-UP1-RNNN

Product Description

The MSK060B-0600-NN-M2-UP1-RNNN synchronous servomotor manufactured by Bosch Rexroth is cooled by natural convection. The motor comprises a 10Nm holding brake that works on the electrically releasing principle. The product is fitted with a type plate featuring its type designation and key technical details that are needed to procure spare parts when there is a failure. The device has an IP 65 degree of protection as per EN 60034-5 specifications. The unit makes use of an EnDat 2.1 multiturn absolute encoder with 2,048 signal periods and 4,096 distinguishable revolutions. This encoder helps in preserving the absolute position of the axis even after the motor is turned OFF.

This motor has to be connected only with the readymade power and encoder cables offered by the manufacturer. The plug connectors of the product have to be removed by pulling the plug and not the cable. The device should always be connected only in a de-energized state. The unit has an adjustable flange socket that helps to change its orientation. Its thermal coupling changes with the attachment of transmissions. The motor supports a maximum operating temperature of 55°C. The product features a temperature change rate of 0.5°C/min during operation. The device depicts maximum allowed vibration axial and radial loads of 10m/s². This MSK060B-0600-NN-M2-UP1-RNNN servomotor has a one-year warranty backing.

The product features a length code of C. The device can be installed both horizontally and vertically. It has to be ascertained that there is no fluid accumulation at the output shaft when the motor is installed upright with the shaft facing upward. The unit comes with a RAL 9005 black-colored varnish for its housing. The motor features a keyway shaft designed in accordance with DIN 6885-1 specifications and has a shaft sealing ring. This shaft permits form-locking transmission of torques with constant direction. The product is eligible for international shipping all over the world.