MSK060B-0600-NN-M2-UP0-RNNN

Product Description

The MSK060B-0600-NN-M2-UP0-RNNN synchronous servomotor from Bosch Rexroth is used with a drive controller by the same manufacturer for general automation technology-related systems. The motor comes equipped with an optical encoder system and an output shaft. The product should always be utilized only as intended to avoid chances of personnel injury or product damage. The device is intended to be made to function in an area where there is no explosive atmosphere during normal operation. It is meant to be installed and operated only after reading the associated documentation. The drive controller connected with the unit must be programmed before startup so that the motor performs the application-specific functions.

The motor may cause the drive controller to move dangerously because of faulty control. These faulty control actions could be software, firmware or operator errors, wrong or improper cable connection or wiring or defective components. The product tends to have a very hot housing surface with a temperature of up to 155°C during or soon or after the operation. The device belongs to the MSK product group of such offerings from the manufacturer. The unit is supposed to be handled by only using suitable equipment for mounting and transport. It is designed to operate between an ambient temperature range of 0°C and 40°C. This servomotor comes with a one-year warranty.

The product should never be opened or disconnected in a pressurized state. This device must be serviced and repaired only by authorized personnel. The unit has to be grounded by means of a motor cable. Its housing should always be protected against corrosion. The motor does not comprise a holding brake. The product comes in a size code of 060. The device is likely to have a high temperature when it is overloaded, resulting in explosion hazards. The synchronous motor can be shipped to any address of your preference in any country across the world.