MSK060B-0300-NN-M1-UG1-NSNN

Product Description

The Rexroth MSK060B-0300-NN-M1-UG1-NSNN is a synchronous servo motor produced by Rexroth Bosch. Synchronous servo motors have a wide performance spectrum and fine frame size graduations. They are available in low, average or high-resolution encoder systems depending on the required exactness. Since they can be customized as required, they can be subject to applications beyond classical applications of servo motors. Some uses of the MSK060B-0300-NN-M1-UG1-NSNN are robotics, metalwork machines, handling and automation systems, among others. All safety regulations and requirements of operating the components of the electric drive should be followed. Only qualified persons may work with components of the electric drive and control system or within its proximity. Only applications which are clearly and explicitly stated should the servo motor be put to.  Likewise, the technical data, connection and installation conditions of the components are specified in the respective application documentations and must be followed at all times.

The maximum current and maximum torque for the MSK060B-0300-NN-M1-UG1-NSNN are 12.0 Amperes and 15 Nm, respectively. The synchronous servo motor is cooled naturally with a possible fan mounting and should be operated at ambient temperatures between 0 and 40 degrees Celsius. It has an optical encoder with a multiturn-absolute hyperface interface with 128 signal periods. It has a smooth shaft with a sealing ring and a maximum velocity of 4800 min^-1.  The servo motor has a mass of 6.4 kilograms and has 4 pole pairs.  The MSK060B-0300-NN-M1-UG1-NSNN has a rotatable electric connector which rotates up to 240 degrees and a holding brake, 10 Nm which is electrically released. It has a standard design and is housed in an IP65 casing according to EN 60034-1. It should be operated at a sound pressure level less than 75 decibels.