MSK050C-0600-NN-M3-UG0-NNNN

Product Description

The MSK050C-0600-NN-M3-UG0-NNNN is a synchronous servo motor with a standard design. The motor is part of the MSK product line from Bosch Rexroth. The motor frame size determines important motor dimensions and is directly proportional to the power rating. The frame size of the MSK050C-0600-NN-M3-UG0-NNNN motor according to the type code is 050. The frame length as per the motor type code is C. The code for the motor winding is 0600, and the maximum speed of the MSK050C-0600-NN-M3-UG0-NNNN motor is 6000 RPM. The cooling method for the motor is natural convection. Fan installation for faster cooling is allowed. MSK motors are equipped with integrated encoders. This encoder provides motor speed and position information to the drive control unit.  The MSK050C-0600-NN-M3-UG0-NNNN motor is equipped with a capacitive multiturn encoder with Hiperface with 16 signal periods.

The power and encoder connector on the MSK050C-0600-NN-M3-UG0-NNNN are rotatable. A holding brake is not available on the motor. The shaft is plain and has a sealing ring. The function of the motor shaft is to connect the machine elements to be driven to the motor. The performed data for the motor that is specified in the documentation is valid for 0 to 40 degrees Celsius temperature and 0 to 1000 meters altitude. The performance data of the motors has to be reduced if the specified limits are exceeded. The permitted lowest and highest relative humidity levels are 5 and 95%. The permitted lowest and highest absolute humidity levels are 1 g/m³ and 29 g/ m³. The rate of change of ambient temperature should not exceed 0.5 degrees Celsius per minute. Weight of the MSK050C-0600-NN-M3-UG0-NNNN motor is 5.4 kilograms. The protection class is IP65.