Product Description
The MSK050C-0600-NN-M2-UP1-RNNN is servo motor. It is designed and manufactured by Bosch Rexroth for industrial applications. The motor is used with compatible drive controllers. A feedback device on the motor sends information to the drive controller about motor parameters. This information allows the drive controller to control the motor speed, torque and other parameters. The feedback device on the MSK050C-0600-NN-M2-UP1-RNNN motor is an optical encoder with EnDat 2.1 interface and 2048 signal periods. The motor encoder is a multiturn encoder which provides feedback information within 4096 shaft rotations. The MSK050C-0600-NN-M2-UP1-RNNN motor also features a holding brake that operates electrically when a 24 Volts DC signal is applied The current draw of the brake is 0.5 Amps. The maximum connection and disconnection times are 20 milliseconds and 60 milliseconds.
The MSK050C-0600-NN-M2-UP1-RNNN motor is designed with increased run-out and concentricity. The motor shaft includes a keyway as per DIN 6885-1. The shaft also includes a sealing ring. The power and feedback connectors on the MSK050C-0600-NN-M2-UP1-RNNN are rotatable. The MSK050C-0600-NN-M2-UP1-RNNN is a convection-cooled motor that requires good ventilation. The permitted ambient temperature range for operation is 0 to 40 degrees Celsius. This range is specified to ensure that the internal temperature of the motor – which is higher than the ambient temperature – does not reach levels that could cause the motor to malfunction or fail. The motor output falls by approximately 20% if the ambient temperatures rises to 55 degrees Celsius. Operation of the MSK050C-0600-NN-M2-UP1-RNNN motor at temperatures that exceed 55 degrees Celsius is not permitted by Bosch. The recommended altitude range is 0 to 1000 meters. The motor output derates by approximately 35% if the altitude reaches 3000 meters.
Wake Industrial Warranty
