MSK050C-0450-NN-S1-UG1-NNNN

Product Description

The Rexroth MSK050C-0450-NN-S1-UG1-NNNN is a synchronous servo motor. A synchronous servo motor is a motor where a rotor is driven simultaneously by the rotating field in the stator using the applied permanent magnets. It moves synchronously with the applied rotating field frequency. Synchronous motors are designed to be used as rotary main and servo drive motors. Typical fields of application include machine tools, paper-milling machines, metal-fabrication machines, etc. Controlling and monitoring of the motors may require the connection of additional sensors and actuators. The operation of synchronous servo motors may pose potential for high risk. As such, only qualified persons may work with components of the electric drive and control system or within its proximity. Additionally, the ambient and operating conditions given in the available application documentation must be observed to preclude risks that could develop.

The maximum torque and current for the MSK050C-0450-NN-S1-UG1-NNNN are 15.0 Nm and 18.8 Amperes. The synchronous servo motor moves at a maximum velocity of 6000 min^-1 and a 14 min thermal time constant. It has a sound pressure level which is less than 75 dB which is close to the EPA maximum to protect against hearing loss and other disruptive effects. The servo motor has four number of pole pairs and a discharge capacity of its component of 2.4 nF. The surrounding air temperature during operation should be between the range of 0 to 40 Degrees Celsius. The MSK synchronous motor weighs about 5.4 kilograms and about 6.3 kilograms for motors that have holding brakes. The protection class according to EN 60034-5 is IP65 which means it is dust resistant and resistant to water at lower pressures.