MSK050C-0300-NN-M3-UG0-NNNN

Product Description

The MSK050C-0300-NN-M3-UG0-NNNN is a servo motor with a standard design. It is designed and manufactured by Bosch Rexroth for industrial control applications. The motor is deployed in combination with a compatible drive controller. A feedback device on the motor sends feedback to the drive controller. This feedback is used by the drive controller for managing the motor speed and other parameters. The feedback device on the MSK050C-0300-NN-M3-UG0-NNNN motor is a capacitive encoder with Hiperface interface that is rated for 16 signal periods. The encoder draws maximum 50 milliamps at 7 to 12 Volts DC. The MSK050C-0300-NN-M3-UG0- NNNN motor does not feature a holding brake. However Bosch does provide a 6 Nm rated holding brake as an option. The motor housing belongs to the IP65 protection category. Thermal class of the motor is 155.

The feedback and power connections on the MSK050C-0300-NN-M3-UG0-NNNN are rotatable. The shaft is smooth and has a sealing ring. Due to wear, the shaft seal requires periodic inspection and replacement. The shaft seal is one of the factors that leads to the IP65 rating. Other factors include completely enclosed housing and sealed connectors. The high protection rating allows the installation of the MSK050C-0300-NN-M3-UG0-NNNN motor near the working machinery. This allows use of shorter cables for connecting the motor to the drive controller and to the machines. As a result, the CAPEX involved with cable procurement is reduced. Shorter cable runs also lead to easier troubleshooting as shorter cables can be easily replaced in the event of damage or malfunction. The motor cools through natural convection and requires smooth airflow for proper ventilation. The recommended ambient temperature is 0 to 40 degrees Celsius.