MSK050C-0300-NN-M2-UP1-RNNN

Product Description

The MSK050C-0300-NN-M2-UP1-RNNN is a Bosch motor that is designed with increased concentricity and run out as per DIN 42955. It is part of the MSK product range and features an integrated encoder and holding brake. The encoder design is multiturn absolute. The number of distinguishable encoder revolutions is 4096. The encoder signal periods are 2048. The encoder has an EnDat 2.1 interface. The maximum speed that the encoder can measure is 12000 RPM. The maximum current consumption of the encoder is 250 milliamps and the working voltage range is 3.6 to 14 Volts DC. The holding brake on the MSK050C-0300-NN-M2-UP1-RNNN motor operates at 24 Volts DC. The rated current for the brake is 0.76 Amps. The peak brake connection time is 20 milliseconds. The peak brake disconnection time is 60 milliseconds.

The power and feedback connectors on the MSK050C-0300-NN-M2-UP1-RNNN motor can be rotated by 240 degrees. The shaft has a keyway as per DIN 6885-1. The motor shaft also includes a sealing ring. The shaft seal prevents both leakage of oil from the motor and also the ingress of contaminants such as dust and moisture. Operation of the motor does cause the seal to wear out. Therefore Bosch recommends periodic inspection of the shaft seal. The seal should be replaced when it has deteriorated to the point that it is not able to perform the functions for which it is used. The IP65 rated MSK050C-0300-NN-M2-UP1-RNNN motor cools via natural convection and requires 0 to 40 degrees Celsius ambient temperature for optimal performance. The motor also requires installation and commissioning by trained personnel for safe and reliable operation. The shipping weight of the MSK050C-0300-NN-M2-UP1-RNNN is 4 kilograms.