MSK050C-0300-NN-M1-UG1-NNPN

Product Description

The MSK050C-0300-NN-M1-UG1-NNPN synchronous servomotor manufactured by Bosch Rexroth features a secondary ground conductor with a minimum 4mm² cross-section. The housing of this product is meant to be kept free of corrosion due to aggressive materials such as coolants, salt mists, cutting oils or lubricants. The device encompasses a holding brake with a 24V +/-10% voltage rating. This brake must be activated only when the associated system has a fault. The unit tends to have a high temperature that can trigger an explosion when it is overloaded. It has a length code of C. It is recommended that the motor functions only in Zone 2 and Zone 22 areas.

This product comprises a radial shaft sealing ring on its output shaft. The device uses a multiturn absolute Hiperface encoder with 4,096 distinguishable revolutions. The unit has a 3.1A continuous current rating at 60K in standstill mode. It incorporates a 240° rotatable connector for its electrical connection. The motor comes in an overall length of 233mm. The product encompasses a smooth shaft with frontal centering hole and DS thread. The thermal coupling of the device changes if it is fitted with transmissions. The unit uses M23 circular connectors with nine and ten pins for its power and encoder connections respectively.

The motor connection must always be done in the de-energized state. The product has an additional terminal on its flange to connect the equipotential bonding. The plug connections of the device have to be disconnected by pulling the plug. The unit supports an installation altitude of 0m to 1,000m over sea level as per DIN EN 60034-1 specifications. It operates with reduced performance if the elevation limit is exceeded. This motor with its one-year warranty backup can be dispatched to any destination across the globe.