MSK050B-0300-NN-M3-UG1-NNNN

Product Description

The MSK050B-0300-NN-M3-UG1-NNNN servomotor is a rotary actuator designed by the Rexroth Indramat to generate kinetic energy for industrial production systems efficiently. It is designed with a sensor for position feedback. It is compatible with Rexroth's sophisticated controllers, often a dedicated module designed specifically for use with servomotors. The motor has a housing that is designed to insulate the motor against over-temperature. The MSK050B-0300-NN-M3-UG1-NNNN servo motor is designed according to the American ATEX standards to function properly in potentially explosive areas. It is covered with a black paint that prevents the rapid corrosion caused by liquid substances such as hydraulic oils, dilute acids, dilute alkalis, lyes, and seawater

The MSK050B-0300-NN-M3-UG1-NNNN servo motor uses four pole pairs of permanent magnets to stimulate rotational movements of the rotor shaft when 111.0 Volts of voltage is supplied at 20 degrees Celsius. The input current used by this motor is about 7.2 Amperes; this current is transmitted through the rotor windings, which have a resistance of about 13 Ohms.  The rotor shaft generates a maximum speed of 4300 radii per minute. The MSK050B-0300-NN-M3-UG1-NNNN servo motor is designed with an electronic commutator which ensures a unidirectional speed on the output shaft. The output shaft is a smooth plain cylindrical rotor shaft through which power and torque are transmitted to the connected load. The plain output shaft provides a seamless and glitch-free performance. Positional information is communicated through a fast multiturn hiperface absolute capacitive encoder, which also generates a fast feedback response for the correction of the position of the output shaft to the desired.

The MSK050B-0300-NN-M3-UG1-NNNN servo motor is highly reliable and highly functional. It has overload capabilities and regulates its internal heat through natural convection.