MSK043C-0600-NN-M3-UP0-NNNN

Product Description

The MSK043C-0600-NN-M3-UP0-NNNN is a MSK series servo motor from Bosch Rexroth. MSK servo motors should only be used with accessories that are approved by Bosch. Use of substandard accessories or spare parts can affect the motor performance and can also lead to damage. The motor is designed to be used with a drive controller. The drive controller should be programmed prior to startup so that the motor executes the desired functions in the appropriate manner. MSK motors should only be operated under the assembly and installation conditions, in the normal position and under the environmental conditions that are specified in the manufacturer documentation. Some common examples of issues that can lead to dangerous movements of motors are improper or wrong wiring, incorrect parameter entry during commissioning, defective components, sensor or encoder malfunction and software or firmware errors.

The issues listed above can occur immediately after the motor is switched on. The issues can also occur after an unspecified duration of trouble-free operation. The monitoring functions performed by the drive are normally sufficient to prevent malfunctions. A risk assessment of the installation should be performed. This risk assessment will enable implementation of monitoring functions and higher-level measures for ensuring the safety of personnel and equipment.  The frame size of the MSK043C-0600-NN-M3-UP0-NNNN motor is 043 and frame length is C. The motor winding code is 0600. Features supported by the motor include shaft with keyway and sealing ring, multiturn absolute capacitive encoder with 16 signal periods and 240-degree- rotatable power connectors. A holding brake is not available on the MSK043C-0600-NN-M3-UP0-NNNN motor. The motor cools through natural convection and requires 0 to 40 degrees Celsius for optimal operation.