Product Description

The Bosch Rexroth Indramat MSK040B-0600-NN-S3-UG0-NNNN is a synchronous motor with a nominal speed of 7500 rpm. Specifically, it is a part of the Rexroth IndraDyn N MSK product line. In addition to an integrated optical encoder, the MSK040B-0600-NN-S3-UG0-NNNN is equipped with an absolute Hiperface interface.

The motor has a smooth shaft to which a shaft sealing ring has been attached for added protection. Also, this motor has a maximum torque of 5.1 Nm. It is rated at 8 Amps, which is the maximum rating available. The MSK040B-0600-NN-S3-UG0-NNNN has a frame size of 40 and a motor frame length of B. Natural convection is the cooling method used for the motor. At 20 ^oC, the torque constant is 0.92 Nm/A, and the voltage constant is 58.5 V/1000 rpm. The air temperature around the motor should be kept between 0 and 40 ^oC. According to EN 60034-5, this unit is IP 65 protected and conforms with the thermal class 155, according to EN 60034-1.

The winding on the MSK040B-0600-NN-S3-UG0-NNNN has an inductivity rating of 35.4 mH. The components have a discharge capacity of 1.5 nF. Also, the motor has four pole pairs and a rated moment of inertia of 0.00010 kgm². This unit's thermal time constant is 13 minutes. The MSK040B-0600-NN-S3-UG0-NNNN also has a maximum velocity of 7500 revolutions per minute. The sound pressure level is below 75 decibels. The motor weighs approximately 2.8 kilograms. The motor must only be assembled after the accompanying documentation, particularly the noteworthy precautions, have been thoroughly read. This will ensure that the motor is set up in accordance with the manufacturer's recommendations and that the risk of personal injury and equipment damage is reduced.