MSK040B-0600-NN-M1-UG1-NSNN

Product Description

The Bosch Rexroth MSK040B-0600-NN-M1-UG1-NSNN is a high performance servo motor. Specifications for the integrated holding brake include 4 Nm torque, 24 Volts DC voltage, 0.5 Amps current, 35 milliseconds peak disconnection time and 25 milliseconds peak connection time. Motor holding brakes prevent motor motion until the supply voltage is applied. The holding brake on the MSK040B-0600-NN-M1-UG1-NSNN is of the electrically releasing type. Specifications for the optical encoder on the motor include 128 signal periods, Hiperface support, multiturn absolute design, 4096 distinguishable revolutions, 120 angular seconds system accuracy, 9000 RPM maximum speed, 60 milliamps maximum current consumption and 7 to 12 Volts supply. The connector on the MSK040B-0600-NN-M1-UG1-NSNN can be rotated 240 degrees in either direction. The motor has a smooth shaft with sealing ring. Cooling method employed by the motor is natural convection.

Weight of the MSK040B-0600-NN-M1-UG1-NSNN motor is 2.8 kilograms. The protection class of the motor as per EN 60034-5 is IP65. Due to this high protection rating the motor is completely protected from dust and low-pressure water jets directed at it from any direction. This good protection rating is partly due to the shaft seal. The other factor that contributes to this rating is the sealed motor enclosure. The result is that the motor can be installed near the machinery, leading to space and cost savings. The MSK040B-0600-NN-M1-UG1-NSNN has a rated maximum speed of 7500 RPM. The continuous and peak torque ratings for the 60 K condition are 1.7 Nm and 5.1 Nm. The continuous and peak torque ratings for the 100 K condition are 1.9 Nm and 5.1 Nm. The motor has four pole pairs. The winding inductance is 35.4 millihenry.