Product Description
The MSK040B-0450-NN-M2-UG0-NNNN synchronous servomotor must be disassembled and secured against moving or dropping only after disconnecting its mechanical connections. The Bosch Rexroth motor encompasses a standard smooth shaft that has a friction seal in the form of a shaft sealing ring. The product portrays a winding code of 0450. The device renders maintenance-free operation if it is used within the specified operating conditions. This unit must always be cooled before any maintenance work is done on it. Its functions can be negatively affected because of excessive dirt, dust or chips. The motor bearings have to be replaced if running noises occur during operation.
This synchronous motor must be shut down at once if there is a defect in the cable sheath. The product encompasses an IP65 protection class as per EN 60034-5 specifications. The device houses a 240° rotatable connector for its electrical connection. Its shaft offers the assurance of very quiet running with a backlash-free force-fit shaft hub connection. The unit can withstand a maximum of 30N axial force during use. The motor bearings may fail prematurely due to mechanical damage or increased wear. The radial force on the device must never exceed the permissible maximum limit.
The motor is RoHS compliant, CE Certified, EAC Certified and cUL Recognized. The product supports 1,000m maximum installation elevation. The device features relative air humidity ranging between 5% and 95%. The unit portrays a vibration severity grade of Level A in compliance with EN 60034-14 specifications. It incorporates a cylindrical shaft end and a frontal centering hole for the shaft. The motor housing has a RAL 9005 black colored varnish. The encoder of this synchronous motor has R type concentricity and alignment tolerances. The device storage is supposed to be done only in a place that is free of vibration. The motor is offered with a warranty period of one year and can be shipped through trustworthy logistics partners.