Product Description

Bosch Rexroth’s popularity has grown not only among machine users but also within the circles of innovators and designers. Its competence is unmatched and its machine’s quality construction is unparalleled. The motion control aftermarket accessories are designed to accommodate a number of appliances and also with a customizable nature to fit your particular needs. It does not matter whether you are looking for supply modules, servo drives, mains filters, spindle drives, synchronous motors, low inertia motors or even permanent magnetic motors, Bosch Rexroth has your back. These products will exhibit high efficiency, cost-effectiveness, innovation, extreme ruggedness, and excellent performance. They are also designed to accommodate diverse appliances and you can also configure them to your individual machine needs.

The MSK060C-0600-NN-S1-UP0-NNNN synchronous motor by Bosch Rexroth requires cooling to maintain the ambient temperature and you may choose between natural cooling and surface cooling. In natural cooling and at 60K overtemperature, the continuous torque at standstill is estimated to be 8Nm while the continuous current at standstill is 9.5A. With 100K, and the motor on a stall, the continuous current is 10.5A and the continuous torque is 8.8Nm. The continuous current is absent in surface cooling but the continuous torque at standstill stands at 10.4 Nm. While the unit’s maximum current is 38 Amps, the peak torque is estimated to be 24Nm.

At 20⁰C, the constant voltage stands at 57V/min-1, the torque constant is 0.93Nm/A while the winding resistance is 0.8Ohms. You need 4 poles to operate this motor and its winding inductivity is 8.6mH. The MSK060C-0600-NN-S1-UP0-NNNN maximum speed is 6000 min-1 and the thermal time constant stands at 14 minutes. Its ideal operating temperature is 0-40⁰C. Finally, the leakage capacitance of the component is estimated to be 2.2nF.