Product Description
Engineered by Bosch Rexroth, the MS2N04-B0BNN-CSSK0-NNNNN-NN synchronous servomotor encompasses an output shaft with a keyway. This motor has no special design. The product depicts a running noise if there are foreign bodies inside its housing or the bearing is damaged. This device should be stored with its protection covers intact on the output shaft and flange socket. The unit must be replaced only with a motor of an identical type. It is balanced with a half key.
This motor is meant to be worked on only after covering its live parts. The product operation is restricted even for a brief period without the protective conductor connection. This device complies with EN standards and low voltage directives. The unit allows the demagnetization of its permanent magnets with special treatment. Its key must be secured against ejection. This motor encompasses PT1000-type temperature sensors. The product houses a digital encoder for feedback. This device must be installed such that there is unhindered vertical convection. The unit should be installed at a distance of at least 100 mm from adjacent components. Its heat dissipation tends to get reduced because of pollution on its surface.
This motor must be checked and cleaned regularly to maintain performance and shelf-life. The product portrays minimal power loss. This device has a frontal centering hole with a DS thread on its cylindrical shaft end. The unit supports form-fitting torque transmission with constant direction. It is characterized by low shaft-hub connection requirements. This synchronous servomotor is balanced with a 5 x 5 x 20 key.