Product Description
Manufactured by Bosch Rexroth, the MS2N04-B0BNN-CSSH1-NNNNN-GM075N1010BN-NN synchronous servomotor can withstand a maximum radial shock load of 1000 m/s² for 11 ms. This motor cannot be directly operated on a three-phase network. The product may cause material damage because of improper use. This device comprises an electrically releasing holding brake. The unit portrays an extended usable torque speed range higher than the voltage limit. It must be handled only after wearing protective gloves.
This motor must be cooled down before it is touched. The product should not be subject to strikes on the output shaft. This device can be painted with additional varnish after covering its open connectors, type plates, and safety labels. The unit has no sealing air connection. Its surface should not come in contact with temperature-sensitive components. This motor portrays continuous operation with S1 operating mode. The product has a rated speed that is determined by the DC bus voltage. This device features a tolerance limit of +/-10% for the inertia of its rotor. The unit can be sized easily using the IndraDrive software. It supports axial forces up to 30 N without limitation.
This motor must have a bearing replacement after 30,000 operating hours. The product should be stored in a dry and dust-free place. This device is susceptible to damage because of the ingress of liquids. The unit must be mounted safely onto the machine using all the mounting holes. It must be fitted with transmission elements by using suitable equipment. This synchronous servomotor has a voltage of more than 60 V at its connecting points during operation.