Product Description
The MS2N04-B0BNN-CMSH0-NNNNN-NN synchronous servomotor designed by Bosch Rexroth portrays a Level A vibration severity grade up to the rated speed. This motor has floating and fixed bearings. The product is subject to thermal overload because of the soiling of its surface. This device associated type designation and key technical details can be found on its rating plate. The unit features a maximum relative humidity of 75% at 30 degrees C during its transportation. It must be lifted with only tackles that can withstand its weight.
This motor is meant to be stored in a place free of vibration. The product should be protected from dampness and corrosion. This device is to be run without load at 800 rpm to 1000 rpm speed for an hour if the bearings are more than 12 months old after storage. The unit must be fitted with transmission elements with the help of suitable equipment. Its lifting eyebolts must firmly be secured in place before they are used for the pickup action. This motor-related repair and maintenance should be done only when it is in the de-energized state. The product has a SpeedCon lock on its connector. This device features a simple connection process. The unit tends to portray adverse functionality because of excessive dirt, chips, or dust on its surface. Its bearings must be changed after 30,000 operating hours.
This motor must be stored with its protective covers intact on the output shaft and connectors. The product portrays a running noise when there are foreign elements inside its housing. This device should be operated with reduced load when it features a high temperature. The unit has high dynamics and energy efficiency. It portrays Class F insulation. This synchronous servomotor has a circular design for its connector.