Product Description
Engineered by Bosch Rexroth, the MS2N04-B0BNN-CMSH0-NNNNN-GE080N2020BN-NN synchronous servomotor must be connected with the manufacturer's cables. This motor is prone to wear and tear of its shaft sealing ring after 5,000 operating hours. The product uses an advanced encoder with a 20-bit resolution for feedback. This device portrays minimal power loss. The unit is noted for its high performance. It encompasses a short coil head.
This motor has an extended torque-speed range beyond the specified voltage limit when it is used with an IndraDrive controller. The product features less installation work and space requirements. This device uses a thermally insulated aluminum plate when it operates with 60K data. The unit-related key technical data are mentioned on its type plate. Its thermal installation determines the extent of power loss that is discharged through the mounting flange. This motor encompasses permanent magnets that may pose a health hazard for people with metallic implants or pacemakers. The product must be replaced with a motor of an identical type. This device is prone to damage to its output shaft because of impact. The unit is manufactured using energy-optimized production processes. Its IndraDrive controller has a controlled DC bus voltage of 3 x 400 to 480 VAC.
This motor portrays vibrations if the coupling elements are balanced properly. The product cannot be used for residential applications. This device cannot be operated directly on a three-phase network. The unit should have a fixed protective conductor connection before it is switched on. Its vertical axis must be secured against falling after switching the motor off by locking it mechanically. This synchronous servomotor has a mounting flange designed as per DIN 42948 specifications.