Product Description
The MS2N04-B0BNN-CMSH0-NNNNN-GE080N1010BN-NN synchronous servomotor offered by Bosch Rexroth is designed using environment-friendly materials. This motor can be installed vertically with the output shaft facing upward or downward. The product is intended to be used only in industrial machinery. This device does not support operation in explosion-hazardous areas. The unit must be worked on only by people who have the relevant technical expertise to do so. It should be disconnected from the power supply during maintenance or repair work.
This motor has live connecting points during the operation phase. The product does not have any shaft sealing ring around the output shaft. This device comprises two temperature monitoring systems that work independently of each other. The unit must at no time be operated without the associated drive controller. Its output shaft rotates in a clockwise direction. This motor encounters axial and radial forces when it is being operated. The product has a conductive one-layer standard varnish on its housing. This device uses a hybrid M23 connector for its connections. The unit must be connected by taking the general installation conditions into consideration. It does not depend on a fan or coolant for its cooling action.
This motor has a high electric voltage when it is in the operation mode. The product should be commissioned only along with the drive controller. This device must adhere to the ambient and operating conditions specified in its manual. The unit is meant to be repaired only after ensuring that it has been de-energized. It should be worked on only after wearing safety gloves when its surface is hot. This synchronous servomotor can depict undesirable consequences because of insufficient heat radiation.