MS2N04-B0BNN-ASDK1-NNNNN-NN

Product Description

The Bosch Rexroth MS2N04-B0BNN-ASDK1-NNNNN-NN synchronous servomotor does not need an external cooling unit for its operation. This motor incorporates a standard encoder with an optical sampling method for its feedback. This product comprises an output shaft with a keyway on its Side A. The device has an IP 64 protection class. This unit is balanced with a 5 x 5 x 20 key. It is not delivered along with the matching key.This motor features a DS M5 centering hole as per DIN 332 specifications on its cylindrical shaft end. The product can be installed vertically with the output shaft facing either upward or downward. This device may have an unacceptably high load on the bearing and shaft because of the revolving radial force when extremely stiff couplings are attached. The unit portrays a holding torque of 5 Nm for the holding brake. It depicts a reduced braking effect because of very high temperatures and overvoltages. This motor has a N tolerance class. The product encompasses a deep-groove ball bearing that is lubricated with high-temperature grease. This device must be used only with spare parts and accessories approved by the manufacturer. The unit allows its power and encoder connectors to be rotated a maximum of 10 times. Its bearings have a reduced service life when the operation does not comply with the conditions set by the manufacturer.This motor must not be used when there is an extreme temperature fluctuation. The product deploys the electrically releasing principle for the holding brake. This device associated encoder has a HIPERFACE interface. The unit must be disconnected from the power supply during maintenance or repair work. Its holding brake has a service life of 20,000 motor revolutions. This synchronous servomotor is UL Listed and CSA Certified.