Product Description
The MS2N04-B0BNN-ASDH1-NNNNN-NN synchronous servomotor supplied by Bosch Rexroth can be operated with a ctrlX or an IndraDrive drive controller. This motor can withstand a high load based on the ON time with periodic intermittent operation during S3 operating mode. The product needs a bearing replacement to be done after 30,000 operating hours. This device should be handled only by trained and qualified personnel. The unit can be recycled because of its high metal content. Its rating plate is attached to its housing.This motor is designed using environment-friendly materials. The product is equipped with a holding brake to support its operation. This device must be commissioned after storage for a prolonged period. The unit can be installed in either a horizontal or vertical orientation. Its coating on the housing is a standard one-layer varnish. This motor is subject to radial and axial forces on the output shaft and bearing during the operation phase. The product must be stored and transported only in the horizontal orientation. This device should be transported only after determining its weight. The unit needs resurfacing to be done for the holding brake if the bearings are more than a month old after storage. Its permanent magnets must be demagnetized using a special thermal treatment method if needed.This motor must be transported only after determining its weight and choosing the appropriate lifting equipment. The product allows transmission elements such as couplings and pulleys to be fitted onto the output shaft. This device has a voltage rating of more than 60 V at its connections when the rotor is rotating. The unit is meant to be worked only when it is in the de-energized state. Its holding brake has a voltage rating of 24 VDC +/-10%. This synchronous servomotor supports a hybrid connection mode.