Product Description
The MS2N03-D0BYN-CSSK0-NNANN-NN synchronous servomotor provided by Bosch Rexroth has a hot surface temperature of over 60 degrees C when it is in use. This motor must be handled using protective gloves. The product should be allowed to cool down before touching it after use. This device has a DS M5 centering hole as per DIN 332 specifications on its shaft end. The unit can be installed vertically with the output shaft facing downwards or upwards. It has a fixed bearing on Side B. This motor must be placed at a distance of at least 100 mm from adjacent components for unhindered vertical convection.
The product must be stored in a dry and rainproof room. This device should have no fluid accumulation around the output shaft with vertical mounting. The unit must be assembled by taking care not to jam or pinch its centering collar. It must be ensured that the radial and axial forces are not exceeded when its operation takes place. This motor must not be subject to impacts on the shaft end. The product should be worked on only in standstill mode. This device is meant to be connected using only the manufacturer's cables. The unit uses a M23 connector for its electrical connection. Its plug connections must be connected or disconnected only in the de-energized state.
This motor comprises plug connectors that must be connected or disconnected in the de-energized state. The product may trigger unfavorable consequences because of insufficient heat radiation. This device should undergo a bearing replacement after 30,000 operating hours. The unit must be fitted with transmission elements on its output shaft with the help of suitable tools. It should be replaced by a motor of an identical type. This synchronous servomotor should not be operated directly on a three-phase network.
Wake Industrial Warranty
